Friday, February 18, 2011

a propos yesterday's shearing, How could I have neglected to include this detail from Brueghel's flemish proverbs! - still not too late I hope. The proverb is, 'some of us shear sheep, and others pigs'. The commentary points out that Brueghel had drawn the sheepshearer letting his wool fall on the ground, next to turds - in contrast to the careful pigshearer

A hurdle passed today: gluing in the PAM soundboard. It's a hurdle because of the length of the gluing surface and the brevity of the 'open' time with hot glue - less than a couple of minutes. As I was just starting careful preparations, to do the job, later - with help from neighbour I can call upon - an extremely capable friend, who is a secretary, popped in suddenly and briefly for ginger biscuits and yogi tea, and I said, you know, Claudia, I cant think of anyone in Zürich I'd rather help me glue in a soundboard than you, and she said, Let's do it! After, she had to run for a train, before I thought to take a picture with someone in it

Now inaccessibly concealed beneath the soundboard, are a group of talismanic emblems. I was about to do the tree of 'peartree', in ink, when Claudia appeared and suggested striking-while-the-iron-is-hot. But the peartree is implicit in the pear. I put the jesuit emblem in because it has been discovered concealed inside several members of a loose family of late florentine harpsichords - one of which was my first harpsichord love (discovered on a cassette, while housepainting in Guelph, when the world was young). This emblem appears in these harpsichords at a time (1750s & 60s) when the jesuits were coming into confrontation with ruthless worldly powers - quite as synopsized in 'The Mission' - confrontation that would resolve in the dissolution of the order in the 1770s.

interlacing hearts are always good, and aum is aum - Tat tvam asi

Thursday, February 17, 2011

dappling & shearing

I think dappling has to be an art (small a) just because there are so may parameters to vary - differing binders and pigments, in differing proportions, and all the ways you can apply and remove, and layer them, and aswell how to finish the final surface - it's degree and kind of reflectivity. Chez moi every surface is a case history. I'd love to share space with other dapplers so we could observe each other's experiments. Matthew is most experienced with oil paints, where I still have little experience. It takes so much longer to get experience with oils because of drying time: sometimes my impatience can ruin experiments even in casein , a layer of which can take several whole minutes to dry. This surface below is composed of an opaque ground of bluish caput mortuum red, stippled with an opaque brick-red ochre. Then the stippling was obscured with a less opaque layer (more binder and a bit diluter) of the ground colour, before the whole was worked over with the more-orangey red ochre (even more binder and more dilute) slapslapslapslap slapslapslap - light and quick to spread it and moving around so as to minimize blending it with the layer below. Then 'water planing' with a barely moist sponge , to get the low gloss that gives the impression of depth

Unfortunately it only looks this gorgeous from certain angles and in certain lights. more generally it looks like here below - 'interesting' enough, but falling short of the voluptuousness above. I havent seen how the finished side looks in daylight yet. I finished it late today because of a morning outing to get a certain material essential for the harpsichord action - pig bristles.

These a mangalica pigs - half wild, and wholly unsuited to the intensive meat production invented during the first world war, they are now a rare breed, though a centry ago they were of such economic importance (to the Hapsburg empire) that their price was an index, quoted on the Viennese stock market. They are the ideal freerange pig for a climate with harsh winters - they are so hardy . They are quite woolly

If you shake their wool mud and bristles clatter onto your paper at home. You quickly discover you can just about grade the bristles by ear. I was late with my shearing - the boar had been recently slaughtered . The sow's bristles are much softer . But I have enough for two harpsichords now, and when I need more one of her piglets will be boar, as he is already inclined

Friday, February 11, 2011

almost too bold

In the picture below, of in-situ bridge ebonisation , one of the test pieces is acting as a wedge to keep the board steady. The tests gave me confidence for this dangerous operation, but the first touch of iron and oakgall ink on the bridge bled instantly into the board! Only ever so slightly and I was able to remove a few tiny slivers from the surface to correct. But it was a bad omen and i continued with thumping heart. With two feet of one side inked, I lost my nerve and decided to scrape the bridge back to bare wood and change the colour scheme completely, to ochre and turquoise and gold and a bare bridge, til thoughts of so much wasted work and shame at my cowardice, forced me back to the job. I tilted the board so any runs would run away from the fir and wedged the work and with a deep breath, held, continued. You have to move the brush as quickly as you dare, approaching the joint with the soundboard gradually with successive strokes, rather than trying to ink the perilous edge first of all. I can do it with confidence now - I've had lots of practice: beech does not stain well; I've inked it about eight times I think. But I shall never need do this again.

While the soundboard is there, you must admire Mirabal's ribbing system. For all it's apparent simplicity it's unique in the fossil record. The dark edges are not simply shadow, but charring of the wood (just like the ribs of the original instrument) from bending the ribs, over a section of sewer pipe with a fire inside.

Here you can judge if you think it worth the effort to ebonise the bridge(?) It is one of a couple of most sinuous bridge curves I have seen in pictures of harpsichords. The third Mirabal visible here, had it's bridge ebonised at a safer point in the order of operations. It's also walnut which stains beautifully (and is favoured for it's acoustic character in the role of bridge). The original bridge is beech though, so beech is the forger's choice

I paced for several hours today trying to decide how to compose with the chosen colours. I felt a black top edge would be better than letting the exterior caput mortuum border the interior scarlet - below is a rough colour sketch of the interior. I'm making all those moulded soundboard...mouldings, now - for all three Mirabals. Making parts for all three istruments so slows me down - I have to keep reminding myself that this slowness is for the sake of Speed.

Sunday, February 6, 2011

keywell

The carved blocks frame the keyboard and hold a batten in slots, which needs some kind of decorative moulding















First try looks an Awful mess doesnt it!

















I'm so beholden to the clear eyes that spotted this bit of noise I couldnt even see in the decorative cacophony






The rest followed. I hope it looks relatively harmonious That top moulding, which I can improve on the next two, should probably be gold too(?) The very bottom moulding has those tiny little sections in the corners whose trimming to size wounded both my poor thumbs



The two parts of one lid could finally be joined. The hinged batten is nailed on with the longest carpet tacks you can buy, against a piece of steel so the points curl back into the wood -







At least - one Mirabal is ready for the harpsichord parts of the work - at last

Almost ready, the sides get a coat of dammar varnish to hide the spots where the layered casein has sprung little fissures. And I think probably a gold ribbon like the lid has(?)