The slots in the jacks for the tongues to work in, are carefully marked out and cut open with a saw and a chisel
Then the tongues are fit into the slots and the holes for the axles on which the tongues pivot are drilled through jack and tongue
the axles are dressmaking pins. Below I'm redrilling the holes in the tongues a tad bigger, so the tongues will pivot freely even in monsoon humidity conditions. Speaking of which, here we are experiencing a freak spell of such low humidity that both lids have cracked and have to be repaired. I drench the floor with buckets of water and chant kyrie eleison
I've glossed alot of tedious intermediary steps in this report, for the sake of clarity - risking giving the false impression that this is hardly 10 days worth of work. The last day or two were devoted to the final step of inserting the pig bristle springs that control the movement of the tongue (see below). The crucial angle at which the bristle impinges on the tongue is lightly achieved by drilling into the back of the jack through a little board that has a hole at that angle through it. The drill bit itself is a piece of bristle-thickness piano wire, held in a 'pin chuck'. This was the first time I had the clever idea to put the pin chuck in the electric drill! Before I had always made these holes by twiddling the pin chuck with my fingers. This time I have been inspired by Norm's $5 per jack price to seek every possible time savings. 208 jacks finished now: ready to string, in April still!
